Female-female jumper wire
Category:
Signal Type:
n/a
IDeATe Component Number:
2096
Part Set:
Makes an electrical connection between two protruding wires.
Jump to section:
Female-female jumper wire
About

The female-female jumper wire makes an electrical connection between two protruding wires. An appropriate use would be to connect a chip outfitted with male pins to a set of male header pins on a breadboard. This allows you to quickly move all wires in and out of the breadboard instead of one at a time, and maintain relative locations of the wires even if they are removed from the breadboard.

Chip to male headers with female-female jumpers
Chip to male headers with female-female jumpers. | Image from Adafruit